Planiprep Fix

Planiprep Fix is designed for repairing and smoothing interior substrates, including floors and steps.

Application examples:

● Smoothing and trowelling uneven, rough substrates, down to a feather edge.
● Removing uneven areas in new and old buildings.
● Filling smaller cavities, holes, and cracks in load bearing subfloors.
● Quick trowelling or levelling before laying resilient and textile floor coverings.
● Repairing and levelling stairs, pedestals, and corners of columns.

Suitable for commercial, domestic, and industrial projects, the products very fine-grained texture makes it suitable for application down to a feather edge and to achieve a closed surface. Can be applied up to a maximum of 4mm.

Planiprep Fix can be used to eliminate defects or trowel marks.

Substrates levelled with Planiprep Fix have a very smooth, finely textured surface, especially suitable for resilient floor coverings. The installation of all types of resilient and textile floor coverings can occur after approximately 30 minutes.

Planiprep Fix hardens without tension and without cracking out.

A Primer for cementitious substrates is usually not necessary.

Preparation of the mix

4kg of Planiprep Fix requires between 1.4-1.5 litres of water. If smaller amounts are required, 1kg of powder will require 350ml of clean water mixed with a variable speed drill until a homogeneous, lump-free consistency is achieved. Only mix as much mortar that can be applied inside of 7 minutes (at + 23°C).

Application of the mix

The mixed mortar should be applied with a flat edged trowel on the prepared surface and smoothed. The installation of suitable self-levelling compound and all types of flooring can be carried out after approx. 30 minutes (at + 23°C).

Do not use Planiprep Fix externally.

Do not use Planiprep Fix on substrates with permanent rising damp.

Do not use Planiprep Fix at temperatures below + 5 ° C.

Do not apply Planiprep Fix in direct sunlight or expose to heat sources.

Do not use as a wearing floor. Planiprep Fix is designed to be covered by a suitable floor covering.

Specification