M600-Kingswood™ Manor Oak 190mm x 18mm x Random Length Rustic Grade Brush & UV Oiled Engineered Wood Flooring

Kingswood™ Manor Oak Flooring

Kingswood Manor Oak flooring is a light, creamy oak, with very subtle hints of a golden greige undertone. Expect some colour variation, since it’s rustic grade oak. It’s part of our Kingswood™ collection of engineered wood flooring.

We brush and UV oil every board. That means you can sand and re-oil it yourself down the line if it ever needs refreshing. But a lacquered floor can’t do that without a full room job.

Every Kingswood™ board carries independent quality assurance from iFL, International Flooring Labs, tested to ISO 17025.

Before fitting, let the boards acclimatise in the room for at least 48 hours, laid flat. And standing them upright instead can cause them to bow.

Fitting and Cutting

The subfloor needs to be as flat as possible, same as with any flooring. Engineered wood generally has a bit more give than people expect, though. For a genuinely uneven surface, a plyboard overlay or a screed will sort it before you start.

You can fit Kingswood Manor Oak flooring floating, full stick-down, or secret nailed. Floating it needs an underlay underneath, see our underlay range. Going full stick-down, we’d recommend Monosil P adhesive. Sticking it down on a concrete subfloor, you’ll need a liquid damp proof membrane first. On floorboards, ply the subfloor before sticking down.

You can also secret nail Kingswood Manor Oak flooring. This hides the fixing inside the joint rather than on the surface. With Tongue-Tite screws, you drive a screw into each board’s tongue at roughly a 45-degree angle. Space the screws roughly every 6 inches, and they pull each board in tight against its neighbour. They’re self-piloting, so there’s no need to pre-drill. A porta-nailer does the same job a different way. It’s a striking tool, hit with a mallet to drive a nail into the tongue at roughly the same angle. Either way, the next board’s groove covers the fixing completely once it’s in place.

You can cut boards with a chop saw, jigsaw, or hand saw. So Kingswood Manor Oak flooring is ready to fit and finish properly, whichever method suits the job.

Key Features:

• European Oak, Multi-Ply Core: This Kingswood Manor Oak flooring has a 3mm wear layer of genuine European oak over a multi-ply core. That gives you real wood underfoot with the stability engineered wood is built for.
• Random Length Planks: Boards vary between 400mm and 1800mm long, with a bevelled edge on each one, for a natural, less uniform look.
• Tongue and Groove: Fit it floating, glued down, or secret nailed, whichever suits the job.
• Underfloor Heating Compatible: Works with water-based underfloor heating systems.
• 10-Year Warranty: Every board comes with a 10-year warranty.

Specification